Blog Archive
-
2013
(100)
-
June(13)
- Sultan Lade Table
- (Plant) Pot Lights
- Steampunk-style Borrby display case
- Faktum Storage Bed
- Simple Lack Ottoman
- Wall-mounted charging station plus earphone/cable ...
- Terrarium From Another World
- Henriksdal's new look
- Custom Bathroom Unit with Adils legs
- Non-flimsy full height, 24" wide recycling an...
- Bye Bye Lack Shelf: Alternative cat stairs
- Pax Built-in for sloping ceiling
- Map It Out Desk
- May(87)
-
June(13)
Saturday, 1 June 2013
Bye Bye Lack Shelf: Alternative cat stairs
Materials: Red L brackets, red shelves from Ikea
Description: Ikea did away with the Lack shelf! So we made own! We took 5 red shelves, cut 2 in half, used the $0.50 brackets and one fancy red bracket and poof! Our own Lack! Enjoy!
Project was under $30
*we used the $2.99 bath mats and cut them in half so the shelves were soft for the cats.
~ Kristel, Fishtown- Philly
Labels:
pet furniture
|
0
comments
Pax Built-in for sloping ceiling
Materials: PAX closet BIRKELAND doors FINTORP handle
Description: First I have measured the space between the closet and the ceiling this was about 20 cm. I have used 2 rows of aerated concrete blocks of 10 cm direct on the floor to raise the closet 10 cm.
After placing the blocks I had to cut all sides of the closet because at 160 cm (170cm from the floor) the roof slope began. Don't forget to cut the right side, I messed up one panel :(. I have added some wood laths on the walls to mount the covering.
After this I have mounted a wooden lath over the closet to give it more strength and to mount the ceiling covering. After all closets were placed and connected to each other and to the wall I have screwed 12 mm carton board to finish. After grounding I have used a self adhesive MDF finishing profile to make a nice connection to the walls and ceiling. I have used Acrylic kit to finish it up and used white paint.
~ Bram van Tienhoven, NL Hendrik Ido Ambacht
Labels:
Pax
|
0
comments
Map It Out Desk
Materials: Vika Moliden underframe
Description: I used the the Vika Moliden under frame aka desk legs. I would of purchased the desk top too but b/c of where I live they wouldn't ship it. So, I had a desk top made with the exact same dimensions of the one you can purchase at Ikea.
I download a picture of the Jackson Hole Mountain Resort Trail Map then imported it into photoshop and changed the dimensions to fit how I wanted it to appear on the desk top. Then, I took the pdf file to a large format printing company who printed it out on sticker paper. Lastly, I carefully placed the giant sticker on the desk and then added a glass top.
It was super easy.
Checkout the link below for the DIY video I did on the process.
See more of the map desk.
~ that girl katie, Jackson Hole, WY
Labels:
work station
|
0
comments
Friday, 31 May 2013
A Creative Exercise Using RUSCH Clocks
Materials: RUSCH clocks, anything to decorate the clocks with (spray paint, fabric, dollar store trays, etc.)
Description: Description: The RUSCH clocks are really cheap here - in USD $0.84. I wanted to see what sort of ideas I could come up with when hacking the look and design - so I ended up buying 5 of them.
My first experiments were based on trying to change the look of the whole clock - like spray painting the frame black. But anyone who has seen one of these clocks would know what I just did. So my attention went to hacking the round plastic cover. This way the new clock designs wouldn't look like the original RUSCH design.
For three out of the five clocks (The Black Beast, White on White, and Dressed Up) I ended up using the round plastic cover as a base. Two were spray painted, another covered up with fabric. For the Black Beast I cut up the seconds hand to create the number locations.
I didn't want the seconds hand on any of the clocks so I cut off the stems, just to keep the round tab to cover the hole.
Next up is the Double Dose clock. Instead of using the round plastic cover as the base I glued cardboard to the back of an IKEA MARIT dinner table mat.
The last clock, Horizon, used a dollar store serving tray as the base. Half of it was spray painted black, the other half white, to give it a more abstract design. All of the spray painting, including the painting of the first two clocks, were done inside of an IKEA shopping bag (so the spray paint doesn't go everywhere).
To see more pictures of the clock hacks, click here.
~ Jacob, Malaysia
Labels:
Rusch
|
0
comments
Granite Coffee Table with EXPEDIT Wall shelf and Lack granite top sofa table
Materials: EXPEDIT Wall shelf, BLADIS Baskets, FIXA Stick-ons, Lack sofa table
Description: Simple 'Hack'. I was looking for something to support a granite slab for a coffee table which I got from a granite supplier 'bone yard' at a 75% discount - $150. I found the IKEA EXPEDIT cubes which were the perfect height and used the BLADIS wicker storage cubes for magazines and remote controls.
Also by placing the cubes on two corners this allowed for leg room under the table in the corner of the sectional. I also used the FIXA stick-ons to protect the cubes. Total cost of IKEA products $75 - total $225. Interior designer friend said it would sell for $1,000 at a high end furniture store.
I paid only $60 for this sofa table sized beautiful granite piece and in looking for a way to support it I ran across the IKEA LACK Sofa Table $30 - perfect fit - $90 total. An interior design friend thought I paid at least $500 for it. Oh yes - I put IKEA FIXA Stick-on floor protectors on the bottom of the granite to protect the table top.
~ Robert Youngberg, Denver
Labels:
coffee table
|
0
comments
Glass top kitchen peninsula
Materials: two IVAR (80x50x83) cabinets, one TORSBY (180x85) tabletop,three Gnosjo doors (60x92cm) 1 gnosjo door ( 50x92) one Gnosjo plinth , 16 L-Brackets, 4 mending plates , 8 legs (9cm high), a piece of pinewood of 20x50x1,5, and a piece MDF of 180x85 finished with aluminium edging tape from hardware store
Description:
1.- Paint the IVAR cabinets and the piece of pinewood with transparent white glaze that reveals the wood grain.
2.-Assemble two IVARs as instructed and mount four legs each onto the bottom walls. Leaving the doors unassembled, makes handling a bit easier.
3.- Put the two cabinets side by side, leaving a gap of 20cm in between.
4.- Attach the pinewood piece to the bottom of both cabinets to fill the gap using the 4 mending plates, forming a very useful shelf to store the trays. Now you have the island.
5.- Attach the 3 Gnosjo doors (60x92) to the back of the cabinets and the 50x92 door to the peninsula side opposite to the wall with the 16 L-brackets.
6.- Paint the mdf countertop in white and screw it to the top of the cabinets. Put the whole in place.
7.- Put the Torsby tabletop on it
8.- Saw the Gnosjo plinth to get a piece of 180x9cm ant glue it to the legs at the front part of the peninsula.
9.-Fix the peninsula to the wall and put the IVAR doors in place
~ Teresa Aznar, Spain
Labels:
kitchen
|
0
comments
Thursday, 30 May 2013
Antique Exit Sign Lamp
Materials: Alang Lamp, Dioder 4 Piece Light Strip
Description: I found an old Exit sign at a vintage shop and it was only $20 or you can buy them online.
Exit signs come with a hole drilled in the top for ceiling attachment.
I took the base of the lamp, unscrewed the plastic washer and placed the exit sign on it. Screw the washer back in to hold it in its place.
I then put 2 Dioder LEDs inside giving a normal sign we see every day a new take.
~ Zach Berry, Chicago
Labels:
lighting
|
0
comments
Subscribe to:
Posts (Atom)
















