Showing posts with label Pax. Show all posts
Showing posts with label Pax. Show all posts
Saturday, 1 June 2013

Pax Built-in for sloping ceiling


Materials: PAX closet BIRKELAND doors FINTORP handle

Description: First I have measured the space between the closet and the ceiling this was about 20 cm. I have used 2 rows of aerated concrete blocks of 10 cm direct on the floor to raise the closet 10 cm.

After placing the blocks I had to cut all sides of the closet because at 160 cm (170cm from the floor) the roof slope began. Don't forget to cut the right side, I messed up one panel :(. I have added some wood laths on the walls to mount the covering.



After this I have mounted a wooden lath over the closet to give it more strength and to mount the ceiling covering. After all closets were placed and connected to each other and to the wall I have screwed 12 mm carton board to finish. After grounding I have used a self adhesive MDF finishing profile to make a nice connection to the walls and ceiling. I have used Acrylic kit to finish it up and used white paint.

~ Bram van Tienhoven, NL Hendrik Ido Ambacht
Monday, 20 May 2013

Hallway storage from Pax wardrobe


Materials: Pax wardrobe

Description: We have a side door that never gets used. Stuff got piled in front of it all the time, so it was time to do something.

I cut a Pax wardrobe half and fixed it in front of the door. I needed two doors, which were cut half. I used one door for side filler panes to make it look like built in unit. Second door was used in a shoe rack project.
Top needed to be more solid than wardrobe top. I used a kitchen worktop for finishing.
Inside I have one rail for coats and space for shoes.

~ Design by Mika, UK