Showing posts with label craft. Show all posts
Showing posts with label craft. Show all posts
Wednesday, 15 May 2013

Easy IKEA Cabinet Makeover with shelf paper


Materials: IKEA Cabinet (no longer sold), Chevron Shelf Paper, Tape Measure or Ribbon, Scissors

Description: One of my favorite IKEA pieces in my home is this white cabinet (no longer available at IKEA) in my bedroom. Since the walls in my room are an off-white, the cabinet tends to blend in so I wanted to add something to make it POP! I decided that I would add chevron shelf paper to the back of the cabinet.

I started this project by measuring the back of the cabinet. I couldn't find my tape measure so I ended up using a piece of ribbon (also from IKEA) to measure the distance and measured the paper using the grid on the back. Before applying the paper to the back of the cabinet, I removed all of the wooden shelves.



When I started peeling the backing off of the shelf paper, I pulled too much off at once and it was a big sticky mess! After finishing the first section, I started only peeling off a small amount of the backing away from the top while smoothing the paper onto the cabinet.

I continued this process of measuring and applying the shelf paper until the entire back of the cabinet was covered.

The best part about this project? It was cheap and simple! I spent $4 on a 2-pack of shelf paper (I still have a whole roll left) and the project was complete in less than an hour.

What I love about using shelf paper on my IKEA furniture is that it's easily removable so when I get tired of chevron, I can take it off and start all over again!

See more of the IKEA cabinet with shelf paper backing.

~ Erica, Kentucky
Friday, 3 May 2013

How to turn an Ikea computer desk into a loom stand with treadles


Materials: Ikea metal computer desk, table loom, scraps of lumber, 6 inches of 1/4 inch threaded rod, nuts, bolts, 2 zip or cable ties, scissors, paracord to tie the lamms to the treadles and the levers to the lamms, pliers, wrench, pipe cutter, 4 angle braces, drill

Description: A couple of months ago, I bought the neatest loom on Kijiji.

It's a 2 harness Leclerc table loom, with a weaving width of 20 inches.

It's a joy to weave on, but my tendons were grousing about the side levers and my back was honking at me.

I figured that there had to be a cheap and cheerful way to build a stand with treadles for it.

and VOILA!!!!! (happy dance)

I have just figured out how to do it! Wheeeeeeeee!



Here'€™s the video that I made about how to convert an Ikea computer desk into a loom stand with treadles.


Or check out my blog to see more of the loom stand with treadles .

~ Noreen Crone-Findlay